Wireless Keychain Remote 2 GIG

The 2GIG 4 Button Keyfob Remote communicates with the 2GIG Control Panel on the 345 MHz frequency. It gives users the ability to turn the security system ON and OFF before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. Keyfobs can be programmed to operate the programmable output in the Control Panel. Use with the 2GIG Universal Garage Door Receiver (2GIG GDR1 345) to open a garage door. The keyfob is a lithium coin battery powered, wireless keyfob designed to fit on a key chain, in a pocket, or in a purse.

Indoor WiFi Pan/Tilt Camera

Add video to your 2GIG system powered by SecureNet with our new family of IP Cameras. These cameras add exceptional value, features, and ease-of-use and are the latest addition in our expanding SecureNet solution.

Indoor/Outdoor WiFi Bullet Camera

Add video to your 2GIG system powered by SecureNet with our new family of IP Cameras. These cameras add exceptional value, features, and ease-of-use and are the latest addition in our expanding SecureNet solution.

Wireless Door / Window Sensor

The Thin Door/Window Contact is designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.

The door contact also has an external input that accepts connections from normally-closed (NC) dry contact devices. For added protection, it is also equipped with a cover tamper.

Wireless Glass Break Detector 2GIG

The Glass Break Detector is a fully-supervised, tamper-protected, ceiling-or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.

Wireless PIR Motion Detector 2GIG

Passive Infrared Motion Detector is a wall-mounted unit with wide-angle motion protection. It communicates with the control panel using the 345 MHz frequency. When set to High (HI) Sensitivity Mode, the PIR has a maximum range of 30 ft deep x 50 ft wide (9.1 m x 15.2 m). The PIR’s pet-immune feature can be set to tolerate animals up 55 lbs.

Touch Screen Keypad (TS1)

The Wireless Touch Screen Keypad (2GIG-TS1) is a wall-mounted, full-color, touch screen interface that provides many of the same easy-to-use keypad functions available on the control panel. It is designed for indoor use only and gives users the ability to control lights, thermostats, and door locks, as well as to view the status of every sensor zone.

When the 900 MHz Transceiver Module (2GIG-XCVR2-345) is installed in the GC2 control panel, the system can be programmed to communicate with up to four (4) Wireless Touch Screen Keypads.

Doorbell Camera

Our video doorbell is half doorbell half security camera it works by sending real time alerts to your phone and giving you access to a live video feed who's ringing the bell. a built in microphone and speaker allows you to not only chat with your guests but see them as well. 

Wireless Smoke/Heat/Freeze Sensor Alarm

The Wireless Smoke/Heat/Freeze Alarm is a 3xAAA battery‐powered wireless alarm intended for use in a 2GIG system. The alarm has a built‐in wireless transmitter, which communicates with the 2GIG Control Panel. When smoke, excessive heat or cold is detected, the alarm sounds a loud local alarm and the built‐in transmitter sends a signal to the Control Panel. This alarm is designed to provide protection within a 35‐foot radius of the unit. The 2GIG‐SMTK3‐345 can send alarm, tamper and battery condition messages to the Control Panel.

FEATURES

• Smoke, heat, and freeze detection

• Ability to separate the three detection features

• Self-contained sounder

• Supervised transmitter and status LED

• Easy installation and programming

• ETL listed

915MHz Wireless Carbon Monoxide Detector

The CO Detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 feature an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send a alarm/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added.

FEATURES

• Early warning of carbon monoxide (CO) poisoning danger

• Visual and Audible alarm indications upon CO detection

• Built-in 95db Alarm Buzzer and large flashing LED alarm

• Visible and transmitted low battery indication